- On sale!
- On sale!
This is the original Seiko part (number IRH2533U-2410).
Active Print Width: 72mm
Nozzle Plate: Non-Wetting
Physical resolution: 180 dpi
Firing Frequency: 18 kHz (and multiples)
Drop Volume: multiple of 12pl (up to 7 drops)
Printer compatibility: Infiniti Challenger FY-3266T / Challenger FY-306T / Challenger FY-3208T / Challenger FY-3286T / Challenger FY-3286J / Challenger FY-3208GS, Crystek X5300, Leyenda 3200F3 / 1800T3, Nuocai NC-SPT2531, Forni HS1804, Icontek TW-1800J3, OraJet J18, CrystalJet 6000 series
DP part number : PPHSE13727
Technology Drop On Demand Piezo
Active Nozzles 510
Native Resolution 180 dpi
Active Print Swath 2.8 inches (71.8mm)
Drop Volume 35 pl
Firing Frequency 6-8 KHz
Linear Print Speed 0.49 m/sec @360dpi, 7KHz
Interface 30 Pin Proprietary parallel I/F
Dimensions 4.95 in W x 3.48 in H x 1.18 in D
125.5mm W x 88.5mm H x 30mm D
Weight .0044lb (200g)
No customer reviews for the moment.
Mirum est notare quam littera gothica, quam nunc putamus parum claram anteposuerit litterarum formas.
This Printhead Assy is suitable for the Mimaki UJV / JFX / UJF-706 Printers. This is the original Mimaki part (number KX-CE308644CS-Gen4).
This Toshiba TEC CA3W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 8 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 42 pico litre of ink.
The StarFire SG1024 / SA-2C is a compact, self-contained unit built to withstand demanding industrial textile and other applications. It uses field proven materials to deliver consistent output over a long service life with continuous ink recirculation and two-color operation at 200 dots-per-inch. Equipped with a single replaceable metal nozzle plate that is designed to withstand abrasion and resist damage. The unit is compatible with solvent, UV-curable and aqueous ink formulations.StarFire SG1024 / SA-2C Printhead
CQ 115-67047 OEM HP FB700 Service Side Lamp/shutter housing. Does not include bulb. Item is new in factory sealed box.
This main board is suitable for Mimaki JV33-BS printers. This is the original Mimaki part (number M011426) and it carries the manufacturer product warranty.
Roland DX6 Eco Solvent Printhead-6701409010
The Mutoh VJ-1618 printhead is suitable for the Mutoh ValueJet 1618 solvent printers. The Mutoh VJ-1618 printhead (sixth generation micro-piezo print head) has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
Ricoh Gen5 / 7PL-35PL printhead (Two Color, Short Cable)
Printer Compatibility: Handtop, Docan Flatbed UV Printers
The Total Length of this printhead is 248mm including cables. (Manual measurement, there may be 1cm error of physical)
Warm Tips: The printhead is required to be installed by professional persons
dx7 printhead, F189010 printhead for epson, DX7 printhead:DX7 printhead, printhead for epson b310n, dx7 printhead for epson b310n, printhead for epson B310N printer, dx7 printhead for epson, dx7 solvent printhead, F189010 printhead for epson, original dx7 printhead, unlocked dx7 printhead,
Epson R1800 printhead (DX5) - F158000/F158010