- On sale!
- On sale!
This Toshiba CA3 on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 picolitre to a maximum of 42 picolitre of ink.
This CA3 printhead was modified to fit the Océ Arizona 200/250 GT printer. Océ discontinued the Arizona 200/250GT printhead (part number 3010106120) but this modified CA3 printhead is equivalent and carries the same 6 months warranty. This printhead is supplied without bracket and the JIG tool PPHDI11519 can be used to easily fit this new printhead on the old Océ bracket.
• Technology: On Demand Piezo Electric
• Resolution: 150 dpi
• Droplet Size: 6 to 42pl
• Maximum Grayscale Levels: 16
• Tot. Amount of Nozzles: 318
• Nozzle Spacing: 169 microns
• Firing Frequency: 13,2 kHz (1 drop) - 2.8 kHz (15 drops)
• Driving Voltage: 14 - 28 V
• Ink Compatibility: Oil Based Pigment Ink and UV Ink
Acuity Advance HD2504
Arizona 200 GT
Arizona 250 GT
No customer reviews for the moment.
Mirum est notare quam littera gothica, quam nunc putamus parum claram anteposuerit litterarum formas.
The Mutoh VJ-1608H printhead is suitable for the Mutoh ValueJet 1608H solvent printers. The Mutoh VJ-1608H printhead (sixth generation micro-piezo print head) has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.
Major improvement in productivity by use of 1024 multi-nozzles and realization of wide print width of 72mm
The StarFire SG1024/MA-2C printhead is a breakout inkjet innovation for high performance printing and decorative applications. It is purpose-built for today’s demanding high-speed scanning and single-pass industrial systems designs. It is an easy to integrate, high performance, drop-on-demand printhead for two-color operation at resolutions up to 200 dpi. A robust and repairable construction makes it ideal for Textile, Wide Format and Commercial Printing and Decorating.
The KJ4 Series offers outstanding reliability and productivity, with full-color print speeds of up to 200 meters per minute at 600 x 480 dpi, or 150 meters per minute at 600 x 600 dpi. The KJ4 Series also offers the widest print line of any printhead in its class, spanning 4.25 inches (108 millimeters)2.
xaar 128/80-W printhead (Purple)
For years the Xaar 128 set the industry standard by offering a consistent, simple and highly flexible inkjet solution for a variety of applications across the coding & marking and wide-format graphics industries. The Xaar 128 printhead is available in two drop volume variants (40 pL and 80 pL) and is compatible with a range of UV, solvent and oil-based inks.
This Assy, Servo Board is suitable for Roland XC-540 printers. This is the original Roland part (number 6700311000).
Epson DX4 original, water-based print head suitable for Roland, Mutoh and Mimaki water-based printers.
This printhead assy is suitable for the Mutoh VJ-1628TD printers. The VJ-1628TD Printhead Assy has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.